Carry Stainless Steel Axial-Flow Submersible pumps are an economical and efficient solution for high-volume, low-head flow applications. The Carry line offers single pumps with the capacity for 50 to 1,450 GPM at 2 to 25 feet of total dynamic head. These pumps can be used in parallel use for management of larger volumes of water.

Carry Stainless Steel Axial-Flow Submersible pumps employ axial-flow lift. Smooth, low-vibration, and low-pressure axial-flow lift is more efficient than centrifugal force for low-head, high-volume pumping. The simplicity of the axial-flow design is one key reason why Carry Stainless Steel Axial-Flow Submersibles are so durable.

Carry Submersible pumps are manufactured of all stainless steel components: investment castings, CNC precision machining, stainless steel fasteners, submersible cable and quality Franklin Electric Submersible motors. The stainless steel construction means that the pumps are corrosion resistant and will not rust, making them longer lasting and more durable than conventional cast iron pumps. The water lubricated submersible motors contain no grease or oil for easy maintenance and no contamination. Carry pumps are economical to operate. Standard applications cost just pennies a day to operate. The pumps are available in a vertical or horizontal versions, single or three phase, a variety of horsepower and voltages to meet the unique needs of your application.

Carry Stainless Steel Axial-Flow Submersible Pumps come complete with a Franklin Electric Submersible Motor installed inside a stainless steel casing. This motor was "Designed to Live Underwater" because of the following features:

1. Its windings are completely hermetically sealed in a steel enclosure with both the outer and inner casings of stainless steel. The enclosure is surrounded and cooled by water.

2. Its rotor, consisting only of laminations and a copper or aluminum cage, runs in water with no ill effect but with the most effective cooling possible, a direct immersion in water.

3. Its bearings, both radial and thrust, are completely submerged in clean water. They require no other lubrication and therefore have an everlasting source of lubricant water.

These features make the Franklin Electric Submersible Motor highly efficient, while reducing the possibilities of rust and wear on components.

Carry Pumps are available in a variety of configurations:  vertical or horizontal; single or three phase; horsepower from 1/2 to 15; 2-wire (1/2 through 1-1/2 Horsepower only) or 3-wire and 115, 200, 230, 460 or 575 volts.  Accessories are also available:  standard or delux control panels; custom designed control panels; DFD Floats; Sensor Floats; B&W Relays and Electrodes; PVC, Aluminum or Stainless Steel Strainer Screens; Quick Disconnects; Swing Check Valves; Flap Gates; PVC Pipe & Accessories, and others. 

Pump Performance Curves are below.  For more information about a specific pump, click on the hyperlink below each performance curve.